TCR Engineering Services, Material Testing, Laboratory, Outsource Analytical, India
material testing
Material Testing

Metallography Field Services in India by TCR Engineering Services
In-situ Metallography
As an NDE technique, In-situ Metallography is ideal for assessing the remaining life of power and petrochemical plants. TCR Engineering Services, India has qualified and experienced field services team that regularly conducts In-situ Metallography on-site at major plants, refineries and process industries. This team from TCR determines in-service degradation of critical components of process plants operating under high temperature/ high pressure/ corrosive atmosphere. The technique enables real-time component condition monitoring and health assessments.

In-situ Metallography and replication is used for microstructural analysis when examining large components that cannot be easily moved or destructive sample preparation is difficult or not permissible. In-situ Metallography allows for quick on-site evaluation of a componentís metallurgical and heat treatment condition and assist investigators when carrying out a remaining life assessment study or a failure analysis project.

The TCR Advantage - Experienced Metallurgists
The Metallurgists at TCR Engineering Services in India has strong experience in the interpretation of microstructure. The Metallurgists have an experience of more then 10,000 replica microstructures and past experiences are well captured into a database. This data base comprises of various plants and information is collected over a different length of time. It also includes a rare collection for different level of damage in the microstructure for power industries/petrochemical/fertilizers and other process industries.

The team is highly skilled in the preparation of the replica. This is more of an art then technique as it is very important to differentiate between the artifacts and the actual defects in the microstructure interpretation.

In-situ Metallography Procedure
After carefully reviewing and accumulating all knowledge about the operating conditions and stress analysis of the component, the inspectors from TCR Engineering Services carefully choose a location of the component for in-situ Metallography. This location (area) is polished using custom TCR-developed tools (portable grinding machine or by electrochemical means) and then etched in a suitable medium. Portable microscopy is then performed to ensure that a good clean etch has been established. Onto this etched surface, a sheet of acetate type film is placed and partially dissolved with a solvent. The etched structure is then imposed on the acetate film as a replica image. The acetate is removed from the surface and secured to a glass microscope slide.

Observations can be made both in the field as well as at the laboratory. For field use, a portable microscope (400X magnification) is used to observe prepared metal surfaces and the quality of the replica. A portable microscope with photographic capabilities can also be used to provide digital or positive prints of the examined areas.

At the laboratory, detailed microscopic examinations are made, including digital photographs to document the microstructures collected in-situ. TCR has access to creating images of Metallurgical replicas on a scanning electron microscopes (SEM). The Microstructure Characterizer Software developed by TCR, assists analyzing the image to determine the microstructural degradation due to creep and calculates the graphitisation, depth or width of Decarburisation, Phase/Volume percentage, grain growth, Inclusion Rating, Particle Size and volume percentage, Particle Count, Porosity and Coating thickness.

TCR has custom developed special purpose in-situ polishing devices which assist to enable metallographic polishing in difficult locations and allows the field services team to carry out high quality replication even on warm components.

TCR can also develop a data bank of critical components of equipment of process plant by periodical monitoring for preventive maintenance and planning for inventory control. TCR can provide suggestions on repair welding of used components of process plants.

The field services team at TCR Engineering Services has conducted In-situ Metallography at power plants, oil refineries, process industries and chemical plants across several locations in India, Bangladesh, and Kuwait (Middle-East).

Metallurgical Replication, Observation and Interpretation
TCR Engineering Services, India adheres to the guidelines presented in ASTM E 1351 (Standard Practice for Production and Evaluation of Field Metallographic Replicas). Replicas are developed with or without gold sputtering and analyzed by our team. Using the replication methods our experts can verify microstructures of a given component.

Inverted Metallurgical Microscope, GX51, from Olympus Corporation, Japan At the material testing laboratory in Mumbai and Baroda, India, TCR has a State-of-the-Art Inverted Metallurgical Microscope, GX51, from Olympus Corporation, Japan. This Inverted Metallurgical Microscope, allows the expert metallurgists at TCR to perform Volume Fraction Measurement by point count method as per E-562 used for Duplex Steel and Carbide Morphology Distribution as per STAHL-EISEN-PRUFBLATT 1520 (SEP-1520) German chart for checking microstructure.

At TCR we have 5 sets of the following In-Situ Metallography kits/equipments:
- Insipol 2000 and advanced electrolytic flow type polisher and etcher
- Portable rough grinder with self adhesive papers
- Portable fine polishing (mini grinder)
- Portable microscope capable up to 400X magnification
- Replica kit, we use specialized plastic based slides for replica preservation which has longer durability and easy to handle at site.
- We have 5 teams comprising of expert Metallography technicians capable to deliver quality and satisfactory services.

TCR Engineering Services has undertaken In-situ Metallography projects at major plants of reputed clients including, Alstom Projects India Limited, Vadodara (Worked on more than 20 RLA projects), BARC (Mumbai), Heavy Water Board (Mumbai), BARC, Reliance Industries Limited (Jamnagar and Hazira), SPIC-SMO, Gujarat Electricity Board, Ahmedabad Electricity Board, GSFC Limited, GNFC Limited, IOCL (Vadodara), L & T, Hindustan Lever Limited (9 Boiler RLA Work), Narmada Chematur Petrochemicals Limited, Bharuch and many more. We perform Metallurgical Replica Interpretation for NDT Corrosion Control Services (NDT-CCS) in Saudi Arabia as well.

Information requested for replica interpretation
  • Objective of In-situ Metallography - Condition assessment, fire/damage assessment, remaining life assessment, or base line data generation
  • Material of construction with exact specification
  • Location of replication with sketch
  • Process parameters and design parameters
  • Service life of the component at the time of replication.
  • Any history of previous failures at the location of replication.
Rates for Metallurgical Observation and Interpretation
Please contact us for rate information for on-site in-situ Metallography. Our charges for this type of service will depend on number of locations which need to be analyzed. Please let us know the number of locations, material of construction and tentative date of inspection and we shall send you a complete quote.

Download Brochure
Visit our download section to get adobe acrobat (pdf) versions of our company profile, testing services, price-list, customer lists, and more.