Services
Inspection Manpower and Third-Party Services
Five service lines, one point of accountability: third-party audit and quality inspection, welding inspection, source and vendor inspection, coating inspection, and turnaround manpower. The buyer here is a turnaround manager or an EPC source-inspection lead who needs credentialled people at the gate.
Request a QuoteIn brief
TCR deploys API, NACE/AMPP, AWS, CSWIP, BGAS, PCN and ASNT qualified inspectors for third-party, source and vendor, welding and coating inspection, working to API 510, ISO 9001:2015, ISO 19011:2018 and ASME Sections V and IX. It supplies turnaround manpower of 100 to 200 personnel at peak and has run 700+ positive material identification campaigns across Saudi Arabia, Kuwait and India.
Key takeaways
- 5 specialised service lines under this pillar, from Third Party Audit and Quality Inspection to Coating Inspection.
- Governing standards across the pillar include API 510, ISO 9001:2015, ISO 19011:2018, ASME Section V, ASME Section IX; each service page carries its full standards basis.
- Published technical insights tagged to this pillar are listed below, newest first.
Overview
The inspection manpower pillar staffs a plant shutdown, a vendor mobilisation or a coating-system commissioning event with NDT-credentialled inspectors under a single point of accountability. The buyer in this pillar is operations: a refinery turnaround manager, a fertiliser plant maintenance head, an EPC source-inspection lead, or a real-estate developer running coating qualification on a high-rise façade.
- The buyer: operations, at a refinery turnaround, a vendor mobilisation, or a coating-system commissioning event.
- The expectation: 24-hour mobilisation, certified personnel, and a quality-assurance discipline that survives the audit.
- Certifications held: API, ASNT and BGAS.
- Disciplines: non-destructive testing, asset integrity, corrosion monitoring and high-temperature inspection.
- Accountability: a single point of accountability for the whole deployment.
TCR Engineering supplies inspectors for short-term turnaround projects at plant sites worldwide. The inspectors are based in India, hold API, ASNT and BGAS certifications, and work in oil and gas, petrochemicals, refining and power generation.
They work to international standards across non-destructive testing (NDT), asset integrity, corrosion monitoring and high-temperature inspection, and report findings during the shutdown so that downtime stays short and the plant restarts safely.
TCR deploys its inspectors to the client's site to confirm that the assets meet safety, regulatory and operational requirements.
Capabilities and governing standards
Each linked page carries full method detail, scope and acceptance criteria.
| Service | Governing standards |
|---|---|
| Third Party Audit and Quality Inspection | API 510, ISO 9001:2015, ISO 19011:2018, ASME Section V, ASME Section IX, AWS D1.1 |
| Turnaround Inspection Manpower | API 510, API 570, API 653, API 579, API 580, AWS D1.1, AWS D10.4 |
| Source and Vendor Inspection | See service page |
| Coating Inspection | See service page |
| Welding Inspection | ASME Section IX, AWS D1.1, API 1104, EN ISO 9606 |
The services of this pillar
-
01
Third Party Audit and Quality Inspection
API-, ASNT-, CSWIP- and AWS CWI-credentialled inspectors at vendor premises across India, from raw material verification to final inspection and loading supervision.
-
02
Turnaround Inspection Manpower
100 to 200 inspection personnel at peak for plant shutdowns across India and the GCC: API 510, 570 and 653 inspectors, CSWIP and AWS welding inspectors, and ASNT Level II and III NDT technicians.
-
03
Source and Vendor Inspection
TCR Engineering deploys API-, NACE/AMPP- and ASNT-qualified inspectors for source and vendor inspection at manufacturer works across India and the GCC.
-
04
Coating Inspection
TCR Engineering provides NACE/AMPP-qualified coating inspectors for field and shop coating inspection, working alongside the laboratory's coating evaluation and the cathodic protection division.
-
05
Welding Inspection
WPS written or reviewed, PQR and welder tests witnessed, production welds inspected from fit-up to final visual, records endorsed by an IIW-certified International Welding Specialist.
Personnel Stack
| Credential | Group Bench |
|---|---|
| ASNT NDT Level III | 6 (including Shemi Bhaskaran for RT/LPT/MPI; Nikhil Sabhaya at TCR Advanced for ET/UT/PT/MT/VT plus API 510 plus API 571 plus CSWIP 3.1) |
| ASNT NDT Level II | Multiple |
| BARC Level-1 radiography | 14 |
| PCN Level II / III | Multiple |
| API 510 (Pressure Vessel Inspector) | Multiple |
| API 570 (Piping Inspector) | Multiple |
| API 653 (Tank Inspector) | Multiple |
| API 580 (RBI) | Gopul Patel (Cert. 96800 valid through 31 October 2026) plus broader bench |
| CSWIP 3.1 / 3.2 | Multiple |
| AWS Certified Welding Inspector | Multiple |
| AMPP/NACE Coating Inspector (CIP) Level 2 / 3 | Multiple |
| FROSIO Inspector Level III | Multiple (KSA via TCR Arabia) |
| ISO 9001:2015 Lead Auditor | Multiple |
| API Q1 Lead Auditor | Multiple |
| AERB Radiation Safety Officer | Shemi Bhaskaran (registered as Shemi K B, 21-RSO-681725); Ananta Kishore Parida (22-RSO-734005, Bhubaneswar SSF) and others |
Standards Coverage Matrix (Inspection Manpower)
- Quality Management
- ISO 9001:2015. API Q1. ISO 19011:2018.
- Pressure Equipment Inspection
- API 510 (11th ed., 2022), API 570 (5th ed., 2024), API 653 (6th ed., 2024). API RP 572, API RP 574, API RP 575. ASME PCC-2.
- Welding Inspection
- ASME Section V, ASME Section IX. AWS D1.1 (2025), D1.5. API 1104 (22nd ed., 2021). EN ISO 9606. CSWIP framework.
- Coating Inspection
- SSPC-VIS 1, ISO 8501-1, ISO 8502-3, 8502-6, 8502-9, ISO 8503, ISO 2808. ASTM D3359, D4414, D4417, D4541, D7091. NACE SP0188. AMPP/NACE CIP framework.
- Material Certification
- EN 10204 Type 2.2, 3.1, 3.2.
- HSE
- ISO 45001:2018. AERB Safety Manual AERB/RF-IR/SM-1 Rev. 2 where RT is in scope.
Related insights
22 published insights on this site carry the Inspection Manpower tag. The 6 most recent are below.
-
Factory assessment and audit of Indian manufacturers for international buyers: what to check, when, and with what
An international buyer placing an order with an Indian manufacturer needs four independent checks: a factory assessment before the order, incoming…
-
TCR Engineering and Chugai Technos Sign MOU to Connect India and Japan in Inspection and Asset Integrity
TCR Engineering and Chugai Technos sign three-party MOU on 29 April 2026 to channel inspection and asset integrity services across regions.
-
Third Party Inspection Services in India: EPC and Global Buyers Guide
TCR Engineering provides trusted third party inspection in India for EPC and international buyers, protecting quality at source since 1973.
-
Why Welder Qualification Testing Services Mumbai Are Make-or-Break for Your Projects
Welder qualification testing services Mumbai ensure project success. ASME, API standards compliance. Choose certified professionals for quality.
-
Third Party Inspection Services Oil and Gas - Why Your Project's Success Depends on Getting Independent Eyes on Everything
Third party inspection services oil and gas - TCR Engineering provides independent pipeline, facility & tank inspection since 1973.
-
Proudly Make in India, Inspect in India
Empowering India’s Industrial Growth with Indigenous Third Party Inspection Services
Frequently asked questions
What qualifications do TCR's inspectors hold?
The group bench spans ASNT NDT Level III and Level II, BARC Level I radiographers, API 510 pressure vessel, API 570 piping and API 653 tank inspectors, API 580 RBI, CSWIP 3.1 and 3.2, AWS Certified Welding Inspectors, AMPP/NACE CIP Level 2 and 3, and FROSIO Level III coating inspectors.
How many inspectors can TCR mobilise for a plant turnaround?
TCR deploys turnaround inspection manpower of 100 to 200 personnel at peak, with the buyer expectation of 24-hour mobilisation, certified personnel and a quality-assurance discipline that survives the audit. Inspectors are based in India and deploy to plant sites globally.
Does TCR carry out positive material identification (PMI) campaigns?
Yes. TCR has executed 700+ positive material identification campaigns across Saudi Arabia, Kuwait and India, deploying API-, NACE/AMPP- and ASNT-qualified inspectors for alloy verification across refineries, plants and fabrication shops. PMI sits within the third-party inspection scope of the inspection manpower pillar.
Can TCR provide source and vendor inspection?
Yes. TCR Engineering deploys API-, NACE/AMPP- and ASNT-qualified inspectors for source and vendor inspection at manufacturer works across India, working to EN 10204 Type 2.2, 3.1 and 3.2 material certification requirements and the governing purchase specification.
Does TCR provide coating inspection services?
Yes. NACE/AMPP-qualified coating inspectors cover field and shop coating inspection, working to SSPC-VIS 1, ISO 8501 surface preparation standards, ISO 2808 and ASTM D4541 adhesion and film-thickness methods, and NACE SP0188, with FROSIO Level III inspectors available in Saudi Arabia through TCR Arabia.
Which regions does TCR's inspection manpower cover?
Inspectors are based in India and deploy to plant sites globally, with the group operating across seven countries: India, Saudi Arabia, Oman, Kuwait, Qatar, Japan and Malaysia. TCR Arabia provides the Saudi bench from Dammam, Jubail and Yanbu.