+91 98335 30200  ·  sales@tcreng.com
TCR Arabia| TCR Advanced| TCR Kuwait| TCR Qatar| TCR Japan| Evolve| Investors
TCR Engineering
Thin metal sheets stacked edge-on in cold light, evoking layered documents

TCR Engineering

Downloads

BIS and IBR approvals, the BARC and IOCL pipeline letters, ONGC and BHEL laboratory approvals, CIDCO empanelment and the March 2026 BMC Roads Department registration all sit here as the original PDFs.


Request a Quote

TCR Engineering hosts its accreditation certificates, client approvals, brochures and technical notes on this domain for direct download. The library spans the NABL ISO/IEC 17025:2017 certificate (NABLT0726MH18640), the Nadcap AC7101 certificate, IBR and BIS approvals, and client approval letters from India and overseas. Documents not listed are issued on request.

Document library

Accreditation Certificates and Scope

TCR Engineering

  • TCR Engineering Company Profile 2026

    Version 8.5, 332 pages: history from 1973, accreditations, laboratories, full test scope and the seven-country group footprint.

    PDF (2.7 MB)

  • TCR Engineering Presentation

    Sixty-six slide corporate presentation: TCR Engineering as asset integrity experts, the materials testing laboratory and NDT inspection practice under NABL, ISO/IEC 17025 and BIS approval.

    PDF (7.3 MB)

  • TCR Flyer - Services Range

    Two-page services range flyer: what TCR tests from the Mumbai headquarters and the laboratories in Gujarat, Odisha and Uttar Pradesh, across civil and mechanical testing, NDT and failure analysis, for clients in oil and gas, power, chemicals, construction, aerospace and defence.

    PDF (2.3 MB)

  • TCR Civil and Infrastructure Materials Testing

    Civil and construction materials testing at TCR Engineering: concrete, cement and aggregates, soil and geotechnical, bitumen and road, rebar and couplers, structural audit and non-destructive evaluation.

    PDF (1.8 MB)

  • TCR and BME for Metal Traders

    The TCR-BME sample collection centre at BME House, Gulalwadi: what the Mumbai metal market can have collected, tested and certified, and what the arrangement with Bharat Metal Exchange Ltd (Formerly known as Bombay Metal Exchange Ltd.) carries for its members.

    PDF (295 KB)

  • TCR Corporate Press Kit

    Company facts, the boilerplate paragraph, spokespeople and story angles, a timeline, leadership portraits with captions, and the accreditation certificates

    PDF (702 KB)

  • TCR Corporate Press Kit, complete archive

    The press kit with both logos, the 50th anniversary mark, print-resolution leadership portraits with captions, and the NABL and Nadcap certificates

    PDF (7.2 MB)

TCR Advanced

TCR Arabia

TCR Qatar

TCR Japan

AiOM

Robotics and AI

Books and Technical Publications

  • TCR Engineering Services: the 50th Anniversary Commemorative Book (web edition)

    166 pages by Rohit Bafna and Ashwant Singh, 1973 to 2023. Readable cover to cover on the launch post; print edition ISBN 979-8347661930

    PDF (20.8 MB)

  • Failure Investigation of Boiler Tubes: A Comprehensive Approach (ASM International)

    Announcement and full table of contents for the ASM book by Paresh Haribhakti, P.B. Joshi and Rajendra Kumar, ISBN 978-1-62708-156-6

    PDF (313 KB)

  • Investigating Material and Component Failure

    Technical white paper by the TCR Engineering Services technical team, published July 2004. Thirty pages on the types of material and component failure met in industrial plant, the structured root cause route used to identify them, material selection, and welding problems with the corrective actions each points to.

    PDF (202 KB)

  • Need for Failure Analysis in India and the Middle East

    TCR Engineering Services white paper, 2004. Three pages on why failure analysis is needed in Indian and Middle East refineries, chemical plants and industrial plants, where the material of construction and the component design of imported equipment are not disclosed, and on the structured root cause method TCR applies against the client's own key performance indicators.

    PDF (68 KB)

  • Use of In-Situ Metallography for Plant Health Assessment Studies and Failure Investigations

    Conference paper number 09012 by Paresh U. Haribhakti, TCR Arabia LLC, Kingdom of Saudi Arabia, dated January 2010. Ten pages on in-situ metallography as a non-destructive route to plant integrity assessment, the microstructural database behind it, and case studies of microstructural degradation in components operating at high temperature and high pressure.

    PDF (622 KB)

  • Integrated Approach for RLA of Reformer Tubes by NDT (ARTiS)

    Conference paper by Ketan Upadhyaya, Paresh Haribhakti, Jaidev Patel and V. K. Bafna of TCR Advanced, Vadodara and Mumbai, dated November 2013. Eight pages correlating automated ultrasonic scanning, outer diameter measurement, tube bowing quantification and microstructural characterisation into a single retirement rating for primary reformer tubes.

    PDF (836 KB)

  • Remaining Life Assessment of Components Subjected to High Temperature and Corrosion

    Conference paper by Paresh Haribhakti, Ketan Upadhyaya, Jaidev Patel, J. N. Baad and V. K. Bafna of TCR Advanced Engineering Pvt. Ltd., Vadodara, dated May 2014. Seven pages on the multidisciplinary remaining life assessment route across creep, high temperature corrosion, erosion-corrosion and thermal fatigue, and the microstructural evidence each damage mechanism leaves.

    PDF (464 KB)

  • An Introduction to Ferrography

    Note by Paresh Haribhakti, Managing Director, TCR Advanced Engineering, dated March 2010. Four pages on what analytical ferrography is, the six wear particle types it separates from lubricating oil, and how that debris is read to diagnose wear in bearings, gears and couplings.

    PDF (310 KB)

  • Outsourcing Laboratory Practices

    Presentation by V. K. Bafna, Managing Director, TCR Engineering Services, 2006. Nine slides on what a laboratory outsourcing arrangement covers, in-house against outsourced laboratory operation, and the NABL ISO/IEC 17025 accreditation that gives an Indian laboratory's results international recognition.

    PDF (262 KB)

  • Paresh Haribhakti, Professional Profile

    Seven-page professional profile of Paresh Haribhakti, Founder and Managing Director of TCR Advanced Engineering and Chief Metallurgist and Global Technical Consultant to the TCR Group. Areas of expertise, dated experience, named refinery and cross-country pipeline life-assessment projects, the four systems he built (AiOM, ARTiS, INSIPOL-2000 and the Microstructure Characterizer), qualifications from Maharaja Sayajirao University of Baroda, recognition and awards, selected technical papers and presentations from 2007 to 2026, publications including the ASM International book and the ASM Handbook Volume 11A chapter, and the sixteen courses he teaches.

    PDF (510 KB)

Materials Testing and NDT

Asset Integrity Engineering Consulting

Training

Pipeline Asset Integrity and Radiography

Client Approvals - India

Client Approvals - International

Awards

  • Excellent Laboratory in Private Sector by NACE

    NACE International India Section Corrosion Awareness Award 2007, sponsored by NITS, to TCR Engineering Services Pvt. Ltd. for excellent laboratories in the private sector, in recognition of its contribution to corrosion science. Signed by Dr Baldev Raj, Chairman of the Awards Committee, and A. M. Uplenchwar, Chairman of the India Section.

    PDF (3.0 MB)

  • Govt. of India Certificate of Appreciation (GST), FY 2025-26

    The Central Board of Indirect Taxes and Customs, Ministry of Finance, Government of India, conveys its appreciation to TCR Engineering Services Pvt. Ltd., GSTIN 27AAACT1966D1ZG, for prompt filing of returns and payment of Goods and Services Tax during the financial year 2025-26. Signed Vivek Chaturvedi, Chairman, issued 10 July 2026.

    PDF (189 KB)

Appreciation Letters

Appreciation and Testimonials

MSME and GST

Administrative

  • TCR Testing Terms and Conditions

    The 37 clauses published at /terms/, as one document. Generated from the page itself, so the two cannot drift

    PDF (128 KB)

  • TCR HSE Policy

    TCR Engineering's health, safety and environmental policy: the zero-incident goal, the scope across employees, subcontractors and partners at every work location including high-risk industrial plant, and the health and safety commitments that follow from it.

    PDF (360 KB)

  • Legal Disclaimer and Terms of Use

    Version 2.0, effective 13 August 2026, superseding the undated 2024 terms. Fourteen numbered clauses governing use of www.tcreng.com: intellectual property; what a TCR test report is and is not, per ISO/IEC 17025 clause 7.8; cookies; personal data under the Digital Personal Data Protection Act 2023; warranties; limitation of liability; acceptable use; and governing law with exclusive jurisdiction at Mumbai.

    PDF (96 KB)

  • Sample Size Requirements

    Version 2.1, 15 August 2026. The minimum material TCR needs for every test in the accredited scope, in ten numbered sections: metals by product form, mechanical and metallography specimens, fracture mechanics, reinforcement bar couplers, wet chemical analysis, welding procedure qualification, ASTM A262 Practice E, HIC to NACE TM0284, SSC and SCC to NACE TM0177, and the full civil and building materials schedule in 36 material groups. Every value is taken from the source document; all dimensions in millimetres.

    PDF (150 KB)

Take the certificate you need. Then send us the job.

Request a Quote