Insights · Materials Testing
Materials Testing Insights
169 published articles carry the Materials Testing tag, the most recent dated 2026-11-05. Every one is written from work done on the bench, not from the brochure.
Request a QuoteOverview
Every TCR Engineering insight tagged to Materials Testing: 169 articles, newest first, from the testing and integrity work this capability runs on.
All Materials Testing insights, newest first
-
IS 9103 has no corrosion test: how an admixture trial builds the corrosion evidence anyway
An admixture maker who asks for corrosion testing to IS 9103 is asking for something the standard does not contain. What it does contain is a fair…
-
ASTM F519 hydrogen embrittlement testing of plating and coating processes: what to send to Mahape
TCR Engineering's Mahape laboratory tests plating and coating processes for hydrogen embrittlement to ASTM F519, on its NABL scope: notched specimens…
-
RDSO acceptance tests for a bipolar corrosion inhibiting admixture: the 21-hour accelerated corrosion test and the panel around it
TCR Engineering's Mahape laboratory runs the short-term acceptance panel for a Bipolar Concrete Penetrating Corrosion Inhibiting Admixture to RDSO…
-
ASTM B117 salt spray testing of TMT bars at Mahape: what the test shows and what it does not
TCR Engineering's Mahape laboratory runs salt spray (fog) tests to ASTM B117 under NABL accreditation. Using a six-diameter TMT bar enquiry as the…
-
Factory assessment and audit of Indian manufacturers for international buyers: what to check, when, and with what
An international buyer placing an order with an Indian manufacturer needs four independent checks: a factory assessment before the order, incoming…
-
ASTM G31 immersion corrosion testing at Mahape: how a metal behaves in your own liquid
TCR Engineering's Mahape laboratory runs ASTM G31 laboratory immersion tests: a coupon of the client's metal, in the client's own solution, weighed…
-
One NACE method, four pass marks: sour service testing to Saudi Aramco, ADNOC, QatarEnergy and PDO specifications
A plate with an average crack length ratio of 12 per cent passes API 5L and PDO and fails Saudi Aramco. The NACE method is the same in all three; the…
-
Rebuilding a 13Cr valve seat on a WCB body: the qualification is an overlay, and E410 is the wrong filler
A request for a WPS to rebuild scored 13Cr gate valve seats looks routine. It is two decisions most repair shops get wrong: the build-up is qualified…
-
Hydrogen induced disbonding testing to ASTM G146 opens at Mahape, and why the overlay fails on the way down
TCR Engineering's Mahape laboratory is taking client specimens for hydrogen induced disbonding testing to ASTM G146. What the test reproduces, why…
-
TCR commissions a WDXRF spectrometer for building materials, and what ASTM C114 demands of an XRF result
A wavelength-dispersive XRF spectrometer is now on the bench at Mahape for building materials and alloys. What ASTM C114 demands before an XRF number…
-
What an Accredited Materials Test Report Must Contain
ISO/IEC 17025 clause 7.8 sets sixteen items every report carries, three conditions for reporting uncertainty, and a decision rule that has to be…
-
Quality, Quality, Quality: The Prime Minister's Zero-Defect Mantra and What It Asks of Indian Manufacturing
On 15 August 2026 the Prime Minister told every manufacturer, entrepreneur and MSME that India's identity in the global market must rest on…
-
Make in India, Test in India: Building a Resilient Domestic Quality Assurance Ecosystem for Aerospace Forgings, Castings and Machining
On India's 79th Independence Day, a region-by-region map of the 51 Indian facilities holding NADCAP heat treating accreditation, and the case for…
-
Case Study: HIC and SSC Qualification of Sour-Service Line Pipe for a PDO Project
Yangzhou Chengde Steel Pipe ordered HIC and SSC testing for a Petroleum Development Oman project. The order named two conditions that cannot both be…
-
TCR becomes the first Indian group with two NADCAP AC7101 accredited laboratories: Navi Mumbai and Vadodara
NADCAP has accredited TCR Engineering at Navi Mumbai and TCR Advanced at Vadodara for Materials Testing Laboratories under AC7101. India has 51…
-
TCR Engineering renews NABL ISO/IEC 17025 accreditation to 2030, with 1,483 test methods in scope
NABL has renewed the Mahape laboratory's ISO/IEC 17025:2017 accreditation to 2 March 2030 under certificate NABLT0726MH18640. A…
-
Wabtec Corporation Writes to TCR Advanced: Failure Analysis, Material Characterisation and Reliability Testing
Wabtec Corporation has written to TCR Advanced Engineering to record its appreciation for engineering investigations, metallurgical assessments,…
-
Stress Corrosion Cracking Testing of Aluminium Alloys: What ASTM G47 and G44 Mean for Aerospace Manufacturers in India
NABL-accredited ASTM G47 and G44 stress corrosion cracking testing for aerospace aluminium alloys at TCR Engineering, Navi Mumbai.
-
Flexural Strength Testing for Advanced Ceramics: What Manufacturers Need to Know
TCR Engineering runs ASTM C1161 flexural strength testing and chemical analysis for ceramic manufacturers developing stronger, more consistent products.
-
Ferrography Wear Debris Analysis for Lube Oil
Your lube oil carries detailed evidence of what is happening inside your rotating equipment. Ferrography wear debris analysis reads that evidence…
-
Corrosion Testing for Industrial Materials: What Engineers Need to Know Before Selecting Alloys
TCR Engineering explains how corrosion testing works, which alloys to evaluate, and why test conditions must match real process environments before…
-
Super Duplex Stainless Steel Testing as per EIL Spec 6-79-0015
EIL 6-79-0015 SDSS pre-qualification explained: corrosion tests, TPI requirements, timelines, and what procurement teams must plan for before sample submission.
-
Mica Testing Laboratory India: A Complete Guide to Quality Assurance and Compliance Standards
Discover how mica testing laboratory India services check quality compliance for electrical insulation, EV batteries & industrial applications.
-
Force-Controlled Constant Amplitude Axial Fatigue Test (ASTM E466)
TCR Engineering offers ASTM E466 axial fatigue testing with force-controlled sinusoidal loading. Get reliable material life data from TCR's testing…
-
Accelerated Corrosion Testing in India: What Engineers Need to Know About ISO 9227 Salt Spray Tests
TCR Engineering explains ISO 9227 salt spray testing, NSS vs AASS differences, and what Indian engineers must know before testing corrosion resistance.
-
Why Your Mill Certificate Isn't Enough: BS EN 10204 Type 3.2 Testing That Proves What You Are Actually Getting
BS EN 10204 Type 3.2 certification testing at TCR Engineering. Independent verification of tensile, hardness, and chemical analysis for materials.
-
Why Your Aluminium Powder Coating Needs an Acetic Acid Salt Spray (AASS) Test for 720 Hours
TCR Engineering offers NABL-approved AASS testing for 720 hours on aluminium powder coatings, checking durability in harsh coastal environments.
-
From Lab Data to Building Performance: ASTM D412 Testing That Predicts Membrane Durability
Coating and membrane testing per ASTM D412 and AS/NZS 4548.5 reveals tensile strength and crack bridging. TCR validates waterproofing performance.
-
How Advanced Fatigue Testing Helps Motorcycle Manufacturers Build Safer, More Reliable Bikes
Strain controlled fatigue testing per ASTM E606 reveals how motorcycle alloys perform under cyclic loads. TCR tests for durability and safety.
-
Hydrogen induced disbonding is not cathodic disbondment: what ASTM G146 tests, and what it does not
Two tests share the word disbonding and almost nothing else. ASTM G146 is about stainless overlay on a reactor shell in hot hydrogen; cathodic…
-
NORSOK M-710 Sour Gas Corrosion Testing for Composites and Polymers
NORSOK M-710 corrosion testing for composites and polymers: how the standard works, what labs must provide, and where most programmes go wrong.
-
Pull-Out Test on TMT Bars: Understanding Bond Strength That Actually Holds Your Structure Together
TCR Engineering's pull-out test on TMT bars evaluates bond strength for Fe 550D reinforcement following IS 2770.
-
Why Your Polymer Components Might Be Failing in Harsh Oil & Gas Environments (And How to Prevent It)
Polymer testing per NORSOK M-710 reveals H₂S resistance and chemical compatibility. TCR validates materials for critical oil & gas applications.
-
TCR Engineering Wins Long Term Rate Contract from Godrej Properties for Third Party Civil Testing Across Mumbai Zone
TCR Engineering wins 3-year civil testing rate contract from Godrej Properties for all Mumbai Zone residential projects.
-
CTOD Testing for Structural Steel as per ONGC Spec 2009F
TCR Engineering explains CTOD testing requirements for structural steel under ONGC Spec 2009F Rev.8, including FMA, specimen prep, and accreditation.
-
TCR Engineering's Civil Testing Lab Receives BMC Approval for Construction Material Testing in Mumbai
TCR Engineering's civil lab receives BMC approval for construction material testing across chemical, mechanical, and NDT disciplines.
-
CTOD Testing with H2S Hydrogen Pre-Charging: What Sour Service Projects Actually Require
TCR Engineering runs CTOD fracture toughness testing with H2S hydrogen pre-charging to ISO 15653, ISO 12135, and NACE TM0177, for sour service weld…
-
Retained Austenite in SAE 52100 Steel: Why Accurate Measurement Matters for CAM Performance
Accurate retained austenite measurement in SAE 52100 CAM components is critical for Q&T quality control. Learn which method suits your application.
-
TCR Engineering Becomes India's First Commercial Lab Recognised by BIS for IS 16172 Rebar Coupler Testing
TCR Engineering is India's first commercial lab with BIS recognition for IS 16172 rebar coupler testing, full scope, all diameters.
-
Chemical Analysis Testing: Why Material Composition Decides Project Outcomes
Chemical analysis testing verifies what your material actually contains. TCR's NABL-accredited lab covers OES, ICP-OES, wet chemistry & RoHS.
-
Creep Testing of High-Temperature Alloys: What Every Engineer Needs to Know
Creep testing of high-temperature alloys explained: process, ASTM E139, common mistakes, and how TCR Engineering delivers reliable long-duration test data.
-
CTOD Testing for Welding Electrodes: The Complete Guide to Fracture Toughness at -45°C
TCR Engineering's comprehensive CTOD testing evaluates welding electrode performance at extreme temperatures following ISO 15653 standards.
-
Why Global Manufacturing Giants Are Choosing India for Critical Materials Testing
TCR Engineering's NABL-accredited facility provides international-standard materials testing for USA and EU manufacturers sourcing from India.
-
OQGN and PDO Specification Testing: Your Gateway to Oman's Oil and Gas Market
TCR Engineering offers JSRS-certified testing for OQGN and PDO specifications including HIC, SSCC, and CTOD testing for Oman oil and gas.
-
Fastener Testing That Actually Matters: NABL Accredited Validation for Critical Connections
Fastener testing per ASTM E488 and F606 reveals pull-out strength and mechanical performance. TCR's NABL accredited lab validates critical assemblies.
-
ONGC Specification Testing: Your Complete Guide to Mechanical, Corrosion, and CTOD Testing
TCR Engineering conducts comprehensive ONGC specification testing including mechanical properties, corrosion resistance, and CTOD evaluation.
-
On-Site PMI Testing in India: Positive Material Identification Across Refineries, Plants, and Fabrication Shops
Positive material identification finds alloy mix-ups before installation. TCR Engineering verifies alloys on site across India with 12+ portable XRF…
-
TCR Engineering Conducts Residual Stress Measurement Using X-ray Diffraction (XRD)
TCR Engineering's XRD residual stress measurement service provides non-destructive testing for metallic components with analysis of the results.
-
When 5 Million Cycles Decide Whether a Railway Weld Is Approved: IRS T-29 Fatigue Testing
Fatigue testing of railway welds to RDSO IRS:T-29 at TCR Engineering, Navi Mumbai: four-point bending through 5 million cycles, the evidence behind…
-
Getting Your BIS License for Sheet Piles? Here Is What Every Manufacturer Needs to Know
Sheet piles testing per IS 2062 for BIS certification requires Manakonline pre-registration. TCR Engineering guides manufacturers through the process.
-
Where Energy Meets the Future
TCR Engineering heads to India Energy Week 2026, bringing precision, integrity, and future-ready engineering to the global energy stage.
-
TCR Engineering: National Oilwell Varco's Approved Testing Laboratory for Critical Oilfield Materials in India
TCR Engineering approved by National Oilwell Varco for materials testing in India. Complete DMS2143 specification testing for 4140 alloy steel.
-
Why Nuclear Power Demands Testing at 800°C: TCR Engineering's NPCIL Approval for Elevated Temperature Testing
TCR Engineering approved by NPCIL for elevated temperature tensile testing up to 800°C. Nuclear-grade materials testing at Mahape laboratory.
-
Pitting Corrosion Test as per ASTM G48: TCR Engineering's Complete Guide to Alloy 625 Testing
TCR Engineering runs ASTM G48 pitting corrosion tests on Alloy 625 flanges, with photographs of every test and acceptance limits set by the…
-
Why PDO's Vendors Trust TCR Engineering for Critical Carbon Steel Line Pipe Testing
NACE corrosion testing per PDO SP-2347 for carbon steel line pipes. TCR's Mahape lab is PDO-approved for HIC and SSCC testing to NACE standards.
-
Why Cycle Count Matters: Axial Fatigue Testing of Rebar Couplers to ISO 15630-1
Axial force fatigue testing of rebar couplers per ISO 15630-1 at TCR Engineering, Navi Mumbai, with tensile, bend and chemical tests on the same splice.
-
Why That Ceramic Tile Cracked: Understanding Linear Thermal Expansion in Metals and Ceramics
Linear thermal expansion testing shows how much a material grows with heat. TCR Engineering measures CLTE to ASTM E228, IS 3410 and IS 13630 Part 4.
-
Failure Analysis in a Metallurgical Laboratory in India: What an Investigation Establishes
TCR Engineering's failure analysis metallurgical laboratory in India identifies the root cause of a failure and the corrective action.
-
Material Testing Standards Every Metal Trader Should Know
Essential ASTM material testing standards for metal traders. From tension testing to hardness measurement: everything you need to know.
-
Why Material Testing Matters More Than Ever in India's Growing Industrial Economy
Material testing laboratory services in India: NABL accredited and an IBR Well-Known Material Testing Laboratory. Mechanical, corrosion and chemical testing.
-
Why Welder Qualification Testing Services Mumbai Are Make-or-Break for Your Projects
Welder qualification testing services Mumbai support project success. ASME, API standards compliance. Choose certified professionals for quality.
-
Why ISO 17025 Metallurgical Testing Services India Are Game-Changers for Your Business
ISO 17025 metallurgical testing services India support global acceptance. NABL accreditation makes the difference. Choose wisely.
-
Material Testing of Fasteners as per IS 1367 Standards
TCR Engineering tests bolts, nuts, and washers per IS 1367, checking strength, safety, and quality compliance for critical applications.
-
Evaluation of Industrial Coatings at TCR
TCR Engineering rigorously tests industrial coatings per ASTM & ISO standards to assess adhesion, durability & surface integrity.
-
CTOD Fracture Toughness Testing Laboratory - Why Your Pipeline's Survival Depends on Getting This Right
CTOD fracture toughness testing laboratory: TCR Engineering runs BS 7448 and ASTM E1820 tests from room temperature to -65 °C in Navi Mumbai, under…
-
IS 14331:1995 Testing for Heat-Resistant Materials
TCR Engineering tests materials as per IS 14331:1995 to assess heat resistance, mechanical strength, and structural reliability.
-
Electrochemical Corrosion Testing of Cobalt Chromium Alloy for Implantable Devices
Corrosion testing of cobalt chromium alloy for implants per ASTM & ISO standards.
-
Tensile Testing on a Single Strand of Armored Wireline Cable
TCR conducts tensile testing on single-strand armored wireline cables per ASTM A931 to determine ultimate breaking load.
-
TCR Engineering’s Role in BIS & India’s Testing Growth
TCR Engineering, a BIS-recognised laboratory, plays a key role in India’s quality revolution and the nation’s growing "Test in India" mission.
-
NACE Corrosion Testing Laboratory NABL Certified - Why Your Pipeline's Life Depends on Getting This Right
HIC testing to NACE TM0284 and SSC and SCC testing to NACE TM0177 for oil and gas, at TCR Engineering's NABL-accredited laboratory at Mahape, Navi Mumbai.
-
Precision Wet Chemical Analysis for FeV and FeNiMo Alloys at TCR
TCR's wet chemistry lab carries out precise FeV & FeNiMo testing. Certified methods, trained chemists, and accurate results.
-
CNG Cylinder Safety: SSCC Testing by TCR as per ISO 11439
TCR assesses CNG cylinder safety with SSCC testing as per ISO 11439 Method A. Discover its role in stress corrosion prevention and compliance.
-
Ensuring Coating Durability
TCR Engineering conducts ISO 9227, ASTM B117 & ISO 2819 tests to assess coating durability & adhesion.
-
TCR Engineering Achieves JSRS Certification for Oman
TCR Engineering is now JSRS-certified for Oman, enabling advanced material testing services across the Sultanate's energy sector.
-
Identify Aluminium Window if Powder Coated or Anodised
Not sure if your aluminium window is anodised or powder coated? TCR can confirm it with specialised surface tests.
-
TCR Engineering Launches Sample Pickup Van
Now offering sample pickup for long-term clients, direct from site to TCR's NABL-accredited lab in Navi Mumbai. Schedule today!
-
TCR Engineering Empowers Exporters to Comply with IS 513
TCR Engineering enables exporters to meet IS 513:2016 standards for cold-rolled steel, supporting their entry into the Indian market.
-
Hydrostatic Testing of Pipes in India
TCR Engineering hydro-tests SS316 pipes with fresh water at varied pressures, checking for leaks and long-term safety.
-
ASTM F606 Embrittlement Testing for Coated Fasteners
TCR Engineering in Mahape now offers ASTM F606/606M Sec 7 testing for embrittlement in coated fasteners. Test duration: 48 hrs.
-
CTOD Fracture Toughness per ASTM E1820 in India
TCR Engineering runs ASTM E1820 CTOD testing from room temperature down to -65°C in two cold chambers, on specimens 7.5 mm to 90 mm thick.
-
TCR Engineering Approved by Toyo Engineering & Technip
TCR Engineering labs in Mumbai & Bhubaneswar are now approved by Toyo & Technip for Indian Oil's Paradip PTA project.
-
Weld and Braze Inspections Across India
Weld & braze inspections across India, with ASME IX-certified methods for defence & industrial components.
-
Cyclic Load Testing of Cargo Strap Belts at TCR
Check cargo strap safety with TCR's cyclic load testing: simulate real-world stress, verify durability, and prevent fatigue failures.
-
TCR Advanced qualified by Casale
TCR Advanced is now qualified by Casale SA for SX3000 corrosion tests and looks forward to supporting critical infrastructure projects around the world.
-
Weight Loss Corrosion Testing: ASTM A262 & NACE RP0775
NACE RP0775 (now SP0775) corrosion coupons and ASTM A262 Practices A, B, C, E and F: what each covers and how TCR Engineering tests to them at Mahape.
-
Sour Gas Corrosion Testing in India
Sour gas corrosion testing at TCR Mumbai lab, approved by PDO Oman & Qatar Energy. SSC, HIC, CRA tests per NACE, ISO & ASTM standards.
-
Residual Stress Measurement by XRD
TCR Engineering launches residual stress measurement by X-ray diffraction to ASTM E2860, a non-destructive test for welds, machined and peened parts.
-
TCR Bhubaneswar Lab now NABL ISO 17025 accredited
TCR Bhubaneswar lab assessed and accredited in accordance with the standard ISO / IEC 17025:2017 and NABL, expanding pan-India presence.
-
Hydrogen Embrittlement Testing at TCR
NABL-accredited TCR Engineering offers ASTM F519 hydrogen embrittlement testing to assess material integrity across industries.
-
TCR Engineering Lab using Artificial Intelligence
AI empowers TCR's materials testing labs by automating tasks, enhancing accuracy, and checking ASTM/NACE compliance and boosting efficiency.
-
From "Make in India" to "Proudly Made in India": The Role of TCR Engineering in Elevating Manufacturing Standards
TCR Engineering drives India's journey from 'Make in India' to 'Proudly Made in India' with advanced testing & unwavering quality standards.
-
Creep Rupture Testing of SUPER 304H as per BHEL spec in India
Creep Rupture Test for SUPER 304H (UNS S30432) grade materials per BHEL specifications, IBR requirements, ASTM E139, BS EN ISO 204.
-
Hindalco Commends TCR for Failure Analysis Expertise
TCR Advanced delivers metallurgical analysis for Hindalco cranes, supporting safety, efficiency, and reliability in critical operation
-
Aramco Approves TCR for Pipeline ECA
TCR Advanced Engineering undertakes Engineering Critical Assessment (ECA) to API 1104 for Saudi Aramco's Jafurah Gas Compression Plants and PWIS Project
-
LIMS at TCR Lab for Materials Testing
From Chaos to Confidence: How TCR Engineering's LIMS Transformed a Customer's Journey
-
Hydrogen Embrittlement Test at TCR Engineering in India
TCR's materials testing lab undertakes Sustained Load Test (SLT) for electroplated materials, as per API 20E.
-
Outsource Materials Testing to TCR in India
Outsourcing materials testing to TCR in India delivers NABL accredited results, accepted across borders under the ILAC MRA.
-
Free Webinar on Metallographic In-Situ Replica
Join our webinar on the latest advancements in in-situ metallography and how they can help enhance your plant’s operational efficiency.
-
Elevated Temperature Testing - Tensile, Creep, Fatigue
Testing Material Performance at High Temperatures per BS EN10002, ASTM E21, ISO 6892 and IS 1608
-
TCR’s Role in Rebar Coupler Performance Testing
Rebar coupler performance testing for bridges, roads and buildings.
-
IBR - Well Known Laboratory
Indian Boiler Regulation (IBR) recognises TCR Engineering as a “well known laboratory.”
-
Fatigue Testing - weld joints in rail tracks
TCR Engineering conducts Fatigue testing of weld joints in rail tracks as per IRS-T19, ISO 14587 & other National/International standards
-
TCR lab gets new AAS
Lab in Mumbai installs a brand-new Atomic Absorption Spectrometer machine,
-
TCR Engineering Approved by NOV Inc. for Material Testing in India
All NOV Inc. suppliers based in India can now send their metal-related materials to TCR's lab in Mumbai for rigorous testing.
-
Avinash Tambwegh at Boiler India 2022
Avinash Tambwegh Speech on Testing during Boiler India 2022
-
PDO Approves TCR Engineering, India
TCR Engineering Services is now approved by PDO, Oman to provide material testing and NACE corrosion testing services
-
Bharat Metal Exchange (BME) and TCR - strong association
TCR Engineering and Bharat Metal Exchange Ltd, formerly the Bombay Metal Exchange, run a sample collection centre inside BME House on Kika Street,…
-
TCR Advanced opens in Bharuch
With on-site NDT and sample collection, this office in Bharuch can serve industries needing to meet strict regulatory and safety standards
-
TCR Qatar opens with BIEWU
Currently serving QAFCO and QChem, TCR aims to add QP in its growing roaster of satisfied clients
-
Approved Assayer for ICCL / BSE
TCR will perform the functions of assaying / testing commodities in accordance with the ICCL/BSE norm
-
Re-Certification to BIS accreditation
Adherence to the national standards and supporting reliable testing outcomes.
-
Creep Testing at TCR Engineering
Ensures that materials can handle the rigours of extreme environments and prolonged stress.
-
Third SEM and EDAX added at TCR Advanced
Delivering high-precision analysis for materials testing
-
TCR Arabia renews ISO 9001 certification
TCR Arabia is now officially ISO-9001 (2015) certified.
-
Opening of Evolve - Training Centre
EVOLVE by TCR focusses on giving advanced metallurgical and engineering training.
-
Reliance Industries appreciates TCR Advanced
NKK Prasanna, E&M head at CES Hazira, RIL gave the appreciation letter
-
Services provider for NMRL-DRDO
Materials testing lab and NDT Services of TCR Engineering will serve DRDO, India
-
Intensive training on Welding
Understating of welding techniques, metallurgical aspects of welding and documentation
-
TCR Arabia sponsors NACE Dinner Meet
TCR Arabia team briefed NACE members on the Corrosion & Metallurgical services
-
Registered vendor to Naval Dockyard
TCR services are used to dramatically improve and certify their products, validate material quality, support innovation
-
Appreciation letter from Emerson Process Management
Emerson Process Management has appreciated the work of TCR in material testing and NDT services in India
-
Appreciation letter from Godrej
Metallurgical Testing Services provided to Godrej in India by TCR Engineering
-
Appreciation letter from Tata Power
TCR Engineering materials testing and NDT works appreciated
-
Appreciation letter from MTAR
TCR Engineering undertakes material testing at its lab in Mumbai for MTAR
-
MET ‘14 + Heat Treat Show
Mr. Paresh Haribhakti, MD of TCR Advanced spoke on Development in the field of characterisation
-
TCR Celebrates the successful Mars Orbiter Mission
TCR contribution and award from ISRO for ASLV-D3 Rocket launched into space by India.
-
Appreciation from CAT International
TCR Arabia's Welder Qualification Division received an Appreciation letter.
-
Fatigue, CTOD and Fracture Toughness Testing
TCR has servo hydraulic universal testing machines
-
Course on "Fracture Mechanics, Fracture Toughness and Fatigue Testing"
The course is designed to blend theory and practical aspect of the subject.
-
INS National Workshop on Corrosion and Condition Monitoring
Mr. Paresh Haribhakti, MD, TCR delivered a lecture on In-situ Metallography Replica
-
TCR Engineering has a grand celebration on Diwali
On November 1, Mr. V.K. Bafna, Chairman, TCR hosted the Diwali party for all TCR employees.
-
Appreciation letter from MEW Kuwait
One of the significant projects of TCR in Kuwait in Doha East Power Generation
-
Hydrogen Embrittlement Test in India
TCR Engineering Services, a material testing lab in Mumbai conducts Test as per ASTM B577
-
TCR Engineering acquires Rigaku XRF
XRF is ideal for applications in metals, cement, Ore, Refractories
-
Engineers India Limited (EIL) approves TCR Advanced
Both TCR labs in India are now qualified to test samples from all projects which EIL undertakes
-
TCR Advanced moves to new facility
The new research-oriented facility undertakes advanced metallography, RLA, RBI, material testing and NDT service
-
TCR Advanced starts monthly newsletter
Updates with the latest advancements both in our technical capability as well as industrial progress
-
GE Energy awards a 3-year contract
TCR Arabia has won a contract from GE International for NDT and Metallurgical Services for a period of 3 years.
-
TCR Engineering gets re-certified by Bureau of Indian Standards (BIS)
Approved for several IS standards
-
Supply high carbon steel-based corrosion coupons
TCR Engineering created coupons of the size 70 x 30 x 3mm with a 6mm hole at centre
-
TCR Advanced a research institute for PhD students
Facility at TCR for all PhD students in the metallurgical faculty at Maharaja Sayajirao University of Baroda
-
Awarded SABIC Global Contract for 5 years
TCR Arabia won the SABIC Global Contract, valid from 10-7-2012 to 9-7-2017
-
Metallography of Thermal Spray Coating Analysis
TCR has metallography analyse as per ASTM E1920 E3-2007 and E407
-
TCR Arabia accredited to ISO 9001
Moody International conducted an audit of TCR Arabia’s quality systems and procedures for its compliance to ISO 9001
-
Inauguration of the Laboratory at TCR Arabia
Chairman and board members of TCR Arabia inaugurated the mechanical testing and microbiology lab of TCR Arabia
-
Saudi Aramco visits TCR Arabia in Dammam
Honoured to receive the team from Aramco at TCR Arabia in Dammam
-
TCR Advanced gets approval from Cameron
Cameron places TCR Advanced, Vadodara on Approved Vendor List.
-
V.K. Bafna, Paresh Haribhakti at ASM Heat Treat Show
Paper on Metallurgical Quality Control for Heat Treatment Industries
-
TCR Arabia at 5th MENDT Exhibition in Bahrain
Syed Ameen Hassan, Country Manager of TCR Arabia welcomed H.E. Dr. Abdul Hussain bin Ali Mirza
-
Welding Consultancy, Welders Training & Qualification
TCR Engineering delivers welding consultancy, welder training and qualification, and quality control for high-integrity fabrication.
-
Testing of Radiator Fins for G.I. Coating in India
Mass of Coating test by stripping method as per IS 2633 standards
-
Testing of iron ore fines from Mines in India
Laboratory testing to determine chemical analysis of Fe, FeO,SiO2, Al2O3, Mn, P,S and LOI
-
Metallographic Analysis of Crane Wire
Complete investigation on the cause of damage of a crane’s runner wire rope
-
Testing Welding Electrode for Manufacturers
Gain the Bureau of Indian Standards (BIS) approval on 7018 grade welding electrodes as per IS:814
-
Testing on Screws and Spring Washers as per IS:1573
Testing as per as per IS:1573 Grade 2
-
Reverse Engineering in India
Complete reverse engineering solution of making gear or any other metallic component.
-
Manufacturing of Corrosion Metal Coupons from India
Custom preparation of AISI 1010 test coupons
-
TCR Arabia opens in Kingdom of Saudi Arabia
The office in Saudi Arabia is now under full operations complete with NDT technicians and administrative staff.
-
Microstructure Characterizer Software
Developed by TCR, Microstructure Characterizer is a powerful image analysis software for Metallurgical use.
-
TCR LIMS now Available
Laboratory Information Management Software for Materials Testing Lab, made in India
-
PMI with carbon detection in India
TCR Engineering Services in India has the portable optical emission spectrometer
-
Microstructure Replica Analysis
Analysis of Replica's originated from the Metallography Replication (MR) / in-situ metallography activity to the labs of TCR
-
SSC with 4 point bend as per NACE TM 0177 and ASTM G 39 Test
Sulphide Stress Corrosion Cracking (SSC) test and HIC are specialty df TCR
-
Preventing Lead based toys from reaching Children
RoHS tests using X-Ray Florescence (XRF) to detect Lead (Pb) in goods.
-
Welding Certification and Welder Qualification Services from TCR
Comprehensive welder certification and welding procedure qualification programme.
-
NACE awards TCR - "Best Laboratory Award"
The award ceremony was held in Hotel Intercontinental in Mumbai on September 26, 2007
-
Approved by Halliburton
TCR Engineering Services has been approved and recommended for services performed for Halliburton.
-
Sourcing with Quality Assurance from India: Why TCR Engineering Is the Partner Global Buyers Trust
Sourcing with quality assurance from India is smarter with an inspection partner. See how TCR Engineering delivers reliable procurement & testing.
-
The man who built TCR: How V.K. Bafna turned a small Bombay lab into India's most trusted materials testing company
How V.K. Bafna built TCR Engineering from a one-man lab in Bombay Central in 1973 into the materials testing company it is today.
